KENCO BARRIER LIFT
The Kenco Barrier Lift is a barrier wall clamp that will move and place barrier wall without requiring hydraulics to operate.
Great for a wide range of jobs where barrier wall is used:
- Highway and Traffic Management
- Pedestrian Safety / Crowd Control
- Military Application
- Material Separation & Containment
- Agricultural Industry
USE IT TO LIFT PRECAST BARRIER WALL
- T-WALL / BREMER WALL
- F-SHAPE BARRIER WALL
- SINGLE SLOPE BARRIER WALL
- ZIPPER TEMPORARY BARRIER WALL
- TEXAS LOW PROFILE BARRIER WALL
- FLORIDA LOW PROFILE BARRIER WALL
BARRIER LIFT
THESE AUTOMATIC TONGS WILL DOUBLE PRODUCTION AND CUT TIME IN HALF.
AUTOMATIC ACTION
The mechanical scissor action grips concrete automatically. By positioning and setting the Kenco Barrier Lift onto the wall, the lifting process begins. Elastomer pads clamp tightly against the wall surface. There are no auxiliary hydraulic hookups required. You can see more information in the Kenco lifting device manuals. Carefully review these details on the info, spec, and product sheets so that you can purchase the exact clamp you need.
MATCHES SLOPE OF WALL
Free-swiveling pad angles adjust to match the slope of the wall. Both single slope and F-shape barrier wall are held securely during the process.
Once set firmly back on the ground and tension is released, the wall is released automatically. This action continues with each cycle of the barrier grab.
Standard models can be used on any median barrier with a 6-12″ top and range in capacities from 9,000 to 40,000 pounds. Custom models of this construction barrier wall can be built to accommodate any barrier you need to grab.
CERTIFIED PERFORMANCE
Kenco’s patented below the hook lifting products are designed, manufactured and tested in compliance with the latest revisions of the ASME B30.20 and BTH-1 standards and are accepted by OSHA, CanOSH, as well as virtually all other world wide standards. The Barrier Lift is a patented design under US Patent 6331025.
Related products
KENCO FORKLIFT ADAPTER
Looking for forklift attachment lifting devices? Kenco has adapter resources to expand the lifting possibilities of your forklift. Just slip the forklift attachments for lifting into this adapter and attach the provided safety retention chains from the bulkhead eye to the two top eyes of the adapter.
The design of this forklift hook attachment is comprised of a A514 steel lift eye with two A36 3-1/4” by 9-1/4” rectangular tubes. A three inch diameter lifting eye is positioned at a 24” load center of this forklift rigging attachment that can be used in conjunction with other rigging to connect a Kenco Pipe Lift, Barrier Lift, Multilift or other forklift crane attachment.
The standard forklift attachments for lifting are available in a 12,000 lb and 20,000 lb capacity. The Low Overhead adapter is available in an 8,000 lb capacity.
