S MARK
FLUORESCENT WORKSITE MARKING PAINT
THE FLUORESCENT WORKSITE MARKING PAINT
S MARK FLUO is used for everyday ground marking and identification work in the following areas : roadworks, earthworks, piping, buildings, electrical installations and identifying underground utilities. Easy to use, S MARK FLUO is now fitted with ‘TP’ cap in the same colour as the paint.
PROPERTIES OF THE S MARK
- Usable on a very wide range of surfaces, such as : concrete, asphalt, grass, gravel, sand, stone and wood.
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Rapid drying : approximateley 10min
- Excellent coverage over a large surface area : 1 aerosol is sufficient to paint a line 55 m long and 2 cm wide using the Soppec One-wheel applicator
- Good marking duration even on wet surfaces : up to 6 months for fluorescent paint, depending on application conditions, surface and UV exposure
- S Mark non-fluorescent marking may last even longer
- Can be used to -15°C
Description
COMPOSITION OF THE S MARK
Composition
Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.
APPLICATION METHOD OF THE S MARK
Manually or using our purpose-designed application equipment (One-wheel applicator & gun handle).
BEFORE USE: shake vigorously head down.
AFTER USE: purge head up.
HEALTH AND SAFETY
Les fiches Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
GHS labelling with a single pictogram
Frequently bought together
S MARK
FLUORESCENT WORKSITE MARKING PAINT
THE FLUORESCENT WORKSITE MARKING PAINT
S MARK FLUO is used for everyday ground marking and identification work in the following areas : roadworks, earthworks, piping, buildings, electrical installations and identifying underground utilities. Easy to use, S MARK FLUO is now fitted with ‘TP’ cap in the same colour as the paint.PROPERTIES OF THE S MARK
- Usable on a very wide range of surfaces, such as : concrete, asphalt, grass, gravel, sand, stone and wood.
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Rapid drying : approximateley 10min
- Excellent coverage over a large surface area : 1 aerosol is sufficient to paint a line 55 m long and 2 cm wide using the Soppec One-wheel applicator
- Good marking duration even on wet surfaces : up to 6 months for fluorescent paint, depending on application conditions, surface and UV exposure
- S Mark non-fluorescent marking may last even longer
- Can be used to -15°C
ONE-WHEEL MARKING PAINT APPLICATOR
THE MARKING PAINT APPLICATOR THAT FACILITATES YOUR MARKINGS
The new SOPPEC One-wheel applicator responds to the needs of the most demanding professionals looking for efficient line marking. This easy to use marking tool is a perfect solution to avoid musculoskeletal disorders as it allows to diffuse upright.PROPERTIES OF THE ONE-WHEEL MARKING PAINT APPLICATOR
- Flexible, lightweight and ergonomic thanks to the choice of the materials usedand a design that focuses on user comfort
- It can be personalised to your own brand (depending on quantities)
- Adaptable to suit all sizes of aerosols, it is an essential tool for any worksite
SPRAY GUN HANDLE
THE MARKING TOOL DESIGNED FOR WORKERS
The new plastic Spray gun handle from SOPPEC is lightweight and purpose-designed for professional ground marking. With a new design and new materials, this marking tool will satisfy even the most demanding users. This is a perfect solution to relieve musculoskeletal disorders.PROPERTIES OF THE SPRAY GUN HANDLE
- Usable with different size ofaerosols
- Customizable toyour own brand
- It is also the fundamental tool for marking with stencils
Related products
FLUO TP
HIGHLY FLUORESCENT WORKSITE MARKING PAINT
THE MOST FLUORESCENT WORKSITE MARKING PAINT IN THE MARKET
FLUO TP is designed to meet the very highest demands for marking visibility and longevity. It is particularly appreciated by land-surveyors for setting-out and identification,but is also used in a wide range of other domains such as roadworks, earthworks,pipework and the general construction field. FLUO TP is the most fluorescent marking spray on the market and offers the highest visibility thanks to its new formula (2016) with an even higher density of fluorescent pigments. Easy and safe to use, Fluo TP is fitted with the patented Soppec “TP” safety cap.PROPERTIES OF THE FLUO TP
- Usable on a very wide range of surfaces, such as: concrete, asphalt, grass, gravel, sand, stone and wood
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Rapid drying: approximately 10 min
- Very long life and covering capacity: 1 aerosol applied using the Soppec One-wheel applicator issufficient to mark a durable line 80 m long and 2 cm wide
- High longevity, including on wet surfaces, of up to 12 months (depending on the surface,the application conditions and the UV exposure)
- Temperature range: -20°C to 50°C
IDEAL SPRAY
MULTIDIRECTIONAL FLUORESCENT WORKSITE MARKING PAINT
THE 360° WORKSITE MARKING PAINT
With its multi-directional 360° valve IDEAL SPRAY is recommended when paint marking and identification needs to be applied in different directions: earthworks and landscaping, marking in sewers, mines and tunnels,for second fix work on any horizontal or vertical surface.PROPERTIES OF THE IDEAL SPRAY
- Excellent adhesion to many different types of surface (even when wet): concrete, asphalt, grass,wood, etc
- Rapid drying: approximately 10 min
- High visibility even from a distance thanks to its strongly fluorescent formula
- Aerosol cap the same color as the paint
- Marking duration: 12 months, depending on the application conditions and surface
- Temperature range: -20°C to 50°C
ONE-WHEEL MARKING PAINT APPLICATOR
THE MARKING PAINT APPLICATOR THAT FACILITATES YOUR MARKINGS
The new SOPPEC One-wheel applicator responds to the needs of the most demanding professionals looking for efficient line marking. This easy to use marking tool is a perfect solution to avoid musculoskeletal disorders as it allows to diffuse upright.PROPERTIES OF THE ONE-WHEEL MARKING PAINT APPLICATOR
- Flexible, lightweight and ergonomic thanks to the choice of the materials usedand a design that focuses on user comfort
- It can be personalised to your own brand (depending on quantities)
- Adaptable to suit all sizes of aerosols, it is an essential tool for any worksite
PRO MARKER
NON FLUORESCENT WORKSITE MARKING PAINT
THE LONG LASTING WORKSITE MARKING PAINT
Promarker complements the range of fluorescent paint markers and can be usedfor many different marking / identification purposes: roads and highways, road signage, earthworks, pipework, building works and electrical installations. With excellent covering power it masks other markings easily and effectively. Easy and safe to use, the Pro Marker is fitted with the patented Soppec “TP” safety cap,a largest size is available (750ml net).PROPERTIES OF THE PRO MARKER
- Excellent adhesion to many different types of surface (even wet): concrete, asphalt, sand, wood,grass, etc.
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Rapid drying: approximately 10 min.• Particularly good covering power
- Marking duration: over 12 months (depending on the application conditions and surface)
- high resistance to weathering and UV rays
- Temperature range: -20°C to 50°C
- Wide range of colors including white and brown.
PROTECT MARK
PROTECTIVE VARNISH IN AEROSOL
EXTENDS THE DURATION OF MARKING PAINT OR CHALK LINE
Protect Mark does exactly that, it protects your chalk line or spray paint marking to ensure it remains clearly visible for even longer.PROPERTIES OF THE PROTECT MARK
- Extends the duration of fluorescent marking thanks to a formulation that is resistant to both UV rays and mechanical aggression and wear.
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Can be used up to -15°C
- Colourless when applied
- Drying time : 5 to 10min
S MARK White
WHITE WORKSITE MARKING PAINT
THE WHITE WORKSITE MARKING PAINT
White S MARK is used for everyday ground marking and identification work in the following areas : roadworks, earthworks, piping, buildings, electrical installations and identifying underground utilities. Easy to use, S MARK FLUO is now fitted with ‘TP’ cap in the same colour as the paint.PROPERTIES OF THE WHITE S MARK
- Usable on a very wide range of surfaces, such as : concrete, asphalt, grass, gravel, sand, stone and wood.
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact)
- Rapid drying : approximateley 10min
- Excellent coverage over a large surface area : 1 aerosol is sufficient to paint a line 55 m long and 2 cm wide using the Soppec One-wheel applicator
- Excellent marking duration even on wet surfaces depending on application conditions, surface and UV exposure
- Can be used to -15°C
SPRAY GUN HANDLE
THE MARKING TOOL DESIGNED FOR WORKERS
The new plastic Spray gun handle from SOPPEC is lightweight and purpose-designed for professional ground marking. With a new design and new materials, this marking tool will satisfy even the most demanding users. This is a perfect solution to relieve musculoskeletal disorders.PROPERTIES OF THE SPRAY GUN HANDLE
- Usable with different size ofaerosols
- Customizable toyour own brand
- It is also the fundamental tool for marking with stencils
